Fix footprint collection script [Altium Delphi (E/J)]

This reports a list of footprints by specifying a parent folder
with multiple PCBLIBs.

For Summer09


For AD14 or higher
Since the component "XPDirectoryEdit" is old, I modified that part.


nice!(1)  コメント(0) 

VIA spacing at high frequencies [Altium Delphi (E/J)]

This calculates the proper distance to strike VIA on solid ground.
Calculated from the wavelength of the frequency being used.
(From overseas literature : P = wavelength / 20)


nice!(1)  コメント(0) 

Thickness during cross-hatching [Altium Delphi (E/J)]

If cross-hatching is used, the capacitance decreases.

This will cause an error when calculating the width
of the microstrip line.
Calculate the target Zmesh by calculating this back.
Enter this Zmesh instead of Z and recalculate with the script
introduced earlier.
(Used strip1)


nice!(0)  コメント(0) 

Pad placement script [Altium Delphi (E/J)]

I created a basic script that places a pad.
This is to cope with the case where it cannot be processed by other scripts.


nice!(0)  コメント(0) 

Chip ALC creation script [DOWNLOAD(E)]

This is an SMD type aluminum electrolysis creation script.
The type of silk matches the company's standard.


...Continue reading

nice!(1)  コメント(0) 

AVR, TR shape drawing script [DOWNLOAD(E)]

This script is used for SMD type AVR or TR.
When the heat dissipating pad is T-shaped, it is processed by combining two pads.


...Continue reading

nice!(1)  コメント(0) 

QFP footprint creation script [DOWNLOAD(E)]

A QFP script that only supports packages with the same vertical and horizontal
sizes has been completed.

QFP with more than 80 pins can place a mark every 10 pins.


...Continue reading

nice!(0)  コメント(0) 

Tantalum footprint creation script [DOWNLOAD(E)]

I created a script to create a chip tantalum capacitor footprint.
The pad shape is specified by Jt, Jh, Js with respect to the
value of L1 + L2.
(L2 should be 0.1mm or more.)


...Continue reading

nice!(1)  コメント(0) 

SOD footprint creation script [DOWNLOAD(E)]

This is a diode-only script.
At first I tried to share it with chip tantalum.
In the case of diodes, there are many lead wires.
It became exclusive.


...Continue reading

nice!(0)  コメント(0) 

Transmission line delay time [Altium Delphi (E/J)]

This was ported as a Delphi script from EXCEL.
This script simply calculates from the difference in length between
the two tracks.

The effective dielectric constant value of the substrate material is preset.

nice!(1)  コメント(0)